Low Voltage Switchgear & Distribution Panels
Low Voltage Switchgear & Distribution Panels
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)
MDB(MAIN DISTRIBUTION BOARD)

MDB(MAIN DISTRIBUTION BOARD)

The Main Distribution Board (MDB) is a panel or enclosure designed to house fuses, circuit breakers, and residual current protection devices. It contains the necessary components to distribute electrical power to individual circuits or end-user points. Electrical power is supplied to the MDB from a transformer or an upstream distribution panel.

An MDB typically features one or more incoming power supplies and includes a main circuit breaker, residual current device (RCD) or earth leakage protection. It is composed of an independent enclosure, a busbar system, Molded Case Circuit Breakers (MCCBs), metering devices, auxiliary components, and corresponding current transformers. The internal layout follows a systematic configuration, clearly separating incoming and outgoing sections for safe and efficient power distribution.

The Main Distribution Board (MDB) serves as the central hub of your electrical infrastructure—the “nerve center” of power distribution. Engineered to handle currents of up to 6300A, our MDBs are designed for high breaking capacity systems, ensuring stable, uninterrupted power supply for demanding applications such as factories, high-rise buildings, and large commercial or industrial facilities.


Details

BK Electric is a Main Distribution Board manufacturer and supplier providing low-voltage MDB panels for industrial, commercial and infrastructure projects. Installed downstream of transformers or generators, an MDB receives incoming power and distributes electricity to secondary distribution boards, production equipment and building electrical systems.


Our MDB panels support rated currents from 400A to 6300A, operating voltages of 400V/690V AC, and short-time withstand currents of 50–100kA/1s, depending on configuration. Each main distribution board can be designed with ACB or MCCB incoming protection, multiple outgoing feeders, copper or aluminum busbars, and optional metering and monitoring functions.


As an MDB panel manufacturer, BK Electric provides standard and customized configurations based on project drawings, electrical loads, short-circuit requirements and installation conditions. We also support component selection, engineering drawings, factory inspection and export documentation for international orders.


MDB Technical Specifications

The following specifications outline the available MDB configurations. Final ratings depend on the selected circuit breakers, busbar system, enclosure structure and electrical design.

Technical ParameterSpecification
Product TypeMain Distribution Board (MDB)
Rated Current400A–6300A
Rated Operational Voltage400V / 690V AC
Rated Frequency50Hz / 60Hz
Rated Insulation Voltage1000V AC
Rated Short-time Withstand Current (Icw)50–100kA / 1s
Rated Peak Withstand Current (Ipk)105–220kA
Rated Breaking Capacity65–150kA, depending on configuration
Protection DegreeIP31, IP41, IP42, IP54 (optional)
Enclosure Material2.0–3.0mm cold-rolled steel
Surface TreatmentDegreasing, phosphating and electrostatic epoxy powder coating
Standard Enclosure ColorRAL 7035
Construction TypeFixed, plug-in and withdrawable
Busbar MaterialCopper or aluminum
Applicable Standards ListedIEC 61439-1/-2, GB 7251.1, UL 508A


Busbar Configuration

Busbar ComponentConfiguration
Horizontal BusbarCopper or aluminum
Vertical BusbarCopper or aluminum
Neutral BusbarSame size as phase busbar or reduced capacity
Earth BusbarIndependent earthing system


Note: Short-time withstand current, peak withstand current and breaker breaking capacity are different electrical characteristics. Their final values must be verified against the selected assembly and protection components. Applicable standards and protection ratings are confirmed for each project.


Customized MDB Panel Configuration

BK Electric provides custom MDB manufacturing based on the electrical drawings and operating requirements of each project. The following configurations can be selected according to the required power distribution arrangement.

Incoming and Outgoing Circuit Configuration

  • Main incoming protection using Air Circuit Breakers (ACB) or Molded Case Circuit Breakers (MCCB).

  • Multiple incoming power supply arrangements according to the electrical design.

  • Outgoing feeder quantity and breaker ratings based on connected loads.

  • Fixed, plug-in or withdrawable breaker arrangements.

  • Busbar sizing and layout according to rated current and short-circuit requirements.

Internal Separation and Cabinet Structure

Different internal separation forms can be selected according to electrical safety and maintenance requirements.

ConfigurationAvailable Options
Internal SeparationForm 2, Form 3, Form 4; exact subtype subject to design confirmation
Cabinet ConstructionFixed, plug-in, withdrawable or mixed configuration
InstallationWall-mounted, free-standing or combined cabinet arrangement
Cable EntryTop, bottom or side entry/exit
Enclosure ProtectionIP31, IP41, IP42, IP54
Cabinet Material2.0–3.0mm cold-rolled steel
Surface FinishElectrostatic epoxy powder coating, standard RAL 7035

Metering and Intelligent Monitoring

For projects requiring electrical measurement and centralized management, the MDB can incorporate:

  • Digital energy meters and multifunction power meters.

  • Current transformers (CTs) for electrical measurement.

  • Power quality monitoring instruments.

  • Remote monitoring and control functions.

  • Communication interfaces such as Modbus, Profibus and Ethernet, subject to compatible equipment.

  • Automatic Power Factor Correction (APFC) sections with capacitor banks.

  • BMS integration according to project communication requirements.

Component Brand Selection

The main ACB, MCCB, metering instruments and auxiliary components can be selected according to project specifications and maintenance requirements.

Available component brand options include:

  • Schneider Electric

  • ABB

  • Siemens

  • Qualified Chinese electrical component brands according to project requirements

For a customized MDB quotation, please provide your Single Line Diagram (SLD), load schedule, required current rating, short-circuit level, preferred component brands and installation dimensions. Our engineering team can review the configuration and prepare the corresponding layout drawings and component list for approval.


MDB Applications

As the main low-voltage power distribution point, an MDB supplies electricity from transformers or generators to downstream distribution systems and electrical equipment.


ApplicationTypical Power Distribution Requirements
Industrial Manufacturing PlantsProduction machinery, workshop equipment, auxiliary power and lighting circuits
High-Rise BuildingsMain electrical distribution, elevators, HVAC and public-area power
Hotels and Commercial BuildingsGuest rooms, kitchens, air conditioning and building services
Shopping Malls and SupermarketsRetail units, lighting, refrigeration and central HVAC systems
Hospitals and Medical FacilitiesGeneral building power, utility systems and supporting electrical loads
Airports and Public FacilitiesTerminal buildings, service areas and infrastructure equipment
Data CentersMain power distribution, UPS-related distribution and auxiliary electrical systems
Water Treatment PlantsPumping equipment, treatment machinery and facility power distribution

The MDB configuration should be selected according to the total connected load, incoming power source, required feeder circuits, fault level and installation environment.


MDB Manufacturing Quality Inspection

As an MDB manufacturer, BK Electric places emphasis on enclosure fabrication, electrical assembly and inspection before shipment. Inspection items are checked against the approved drawings, component list and applicable project requirements.

1. Enclosure and Material Inspection

  • Check steel sheet thickness and enclosure dimensions.

  • Inspect cabinet fabrication, door alignment and structural assembly.

  • Check surface pretreatment and powder coating quality.

  • Verify the specified enclosure protection requirements.

2. Busbar and Component Inspection

  • Verify copper or aluminum busbar material against the approved BOM.

  • Check busbar dimensions, arrangement and connection points.

  • Inspect circuit breaker models, rated current and protection accessories.

  • Verify meters, current transformers and auxiliary components.

3. Electrical Assembly Inspection

  • Check incoming and outgoing circuit wiring.

  • Verify cable connections, terminal identification and phase arrangement.

  • Inspect protective earthing and electrical connections.

  • Check breaker operation, mechanical interlocks and functional arrangements.

4. Electrical Testing and Final Inspection

Before delivery, the MDB undergoes applicable factory inspection and routine testing, including:

  • Visual and assembly inspection.

  • Mechanical operation checks.

  • Electrical circuit continuity checks.

  • Insulation resistance testing.

  • Dielectric withstand testing according to the approved test plan.

  • Final inspection against approved technical drawings.

Design verification and type-test documentation should correspond to the applicable assembly system and project specification.

Factory Acceptance Testing (FAT) and third-party inspection can be arranged according to the agreed inspection requirements. Relevant inspection and test records can be supplied with the shipment.


Production Lead Time & Delivery Support

Standard Model Production Time

Typical production lead time for standard configurations is:

  • Approximately 2–3 weeks after drawing confirmation and component availability.

Customized Configuration Lead Time

For project-based customized systems, production schedules depend on:

  • Electrical configuration complexity

  • Component brand selection

  • Intelligent monitoring requirements

  • FAT / third-party inspection requirements

Typical lead time:

  • Approximately 4–6 weeks after technical approval.

Customization includes:

  • Non-standard dimensions

  • Special busbar layouts

  • Intelligent monitoring systems

  • Special IP protection requirements

  • Schneider / ABB component integration

Semi-Finished Inventory Support

To improve delivery speed, we maintain:

  • Standard cabinet body inventory

  • Semi-finished panel structures

  • Common breaker and busbar stock

This allows faster response for:

  • EPC urgent projects

  • Replacement orders

  • Fast-track infrastructure projects


Engineering Documents & Technical File Delivery

We provide complete technical documentation for international projects.

Standard Documents Include:

  • General Arrangement Drawings (GA)

  • Single Line Diagram (SLD)

  • Wiring Diagrams

  • Bill of Materials (BOM)

  • Nameplate List


Factory Test Documents

Before shipment, each MDB undergoes factory inspection and testing.

Documents provided include:

  • Routine Test Report

  • Factory Inspection Report

  • Insulation Resistance Test

  • Mechanical Operation Test Record

Optional:

  • Third-party inspection support

  • FAT (Factory Acceptance Test) witness service 


Frequently Asked Questions

What information is required to get an MDB quotation?

To prepare an accurate quotation, please provide the Single Line Diagram (SLD), electrical load schedule, rated voltage, required current capacity, short-circuit level, number of incoming and outgoing circuits, preferred breaker brands and installation conditions. Cabinet dimensions and project quantity are also helpful.

Can you manufacture an MDB according to our electrical drawings?

Yes. BK Electric can review customer-provided SLDs and load schedules to determine the incoming and outgoing circuit arrangements, breaker selection, busbar configuration and cabinet layout. Engineering drawings and the component list can be submitted for approval before manufacturing.

Can I specify Schneider, ABB or Siemens circuit breakers?

Yes. The main ACBs, MCCBs and other electrical components can be selected according to the project specification. Schneider Electric, ABB and Siemens components are available as options, subject to model compatibility and procurement requirements.

What is the difference between fixed, plug-in and withdrawable MDB configurations?

Fixed configurations use permanently installed circuit breakers and are suitable for straightforward distribution arrangements. Plug-in configurations allow functional units to be connected through plug-in interfaces. Withdrawable configurations allow selected breaker units to be withdrawn for inspection or maintenance. The appropriate option depends on maintenance procedures, operational requirements and project budget.

Can an MDB integrate APFC and BMS monitoring functions?

Yes. MDB configurations can incorporate APFC capacitor banks, digital meters, power quality analyzers and compatible communication interfaces. BMS integration and remote monitoring functions should be specified during the engineering stage to confirm device and protocol compatibility.

What inspection reports and technical documents can you provide?

The project documentation package can include General Arrangement (GA) drawings, SLDs, wiring diagrams, Bill of Materials (BOM), nameplate lists, factory inspection reports, routine test records and agreed FAT documentation. Third-party inspection can also be coordinated when specified in the purchase order.

How long does it take to manufacture a customized MDB?

The production schedule depends on cabinet quantity, electrical configuration, component selection, drawing approval and inspection requirements. The confirmed manufacturing lead time will be provided after technical specifications and the BOM are finalized.

How are MDB panels packaged for international shipping?

MDB panels are divided into suitable shipping sections according to cabinet dimensions and transportation requirements. Export packaging can include moisture-barrier bags, desiccants, shock-absorbing protection and reinforced fumigation-free wooden crates to protect electrical components during international transportation.

Request a Customized MDB Quotation

Looking for a reliable MDB manufacturer and supplier for your industrial or commercial project?

BK Electric provides standard and customized Main Distribution Boards based on project electrical requirements, component preferences and installation conditions.

Send us your SLD, load schedule and technical specifications to receive an MDB configuration proposal and quotation.

MDB(MAIN DISTRIBUTION BOARD)

Have any questions?
We'd love to hear from you
Contact Us